Specifications - Vinyl Resilient Flooring - Safefloor Guard NFSI High Traction

Physical Properties		Print Version

Flooring Radiant Panel	ASTM E648; NBSIR 75-950; NFPA 253, Critical Radiant Flux	0.73 W/cm², Class I
Residual Indentation	Residual Indentation DIN 51955 25 hrs.)	<.15mm (.0059")
Bending Resistance	1cm mandrel DIN 51949	no cracking
Abrasive Wear	EMPA	.05mm
Resistance to Light Fading	ISO	6 7 good (indoor use)
Point load resistance	DIN 5`955	>.15mm (.0059")
National Floor Safety Institute Test	www.nfsi.org	High Traction >0.60 Certified
Static Coefficient of Friction	GPHSZ 032 dynamometer pull method	dry surface 0.7 wet surface 0.6
Shore Hardness A	75
Static Load Limit	DIN 16961.2	<350 lbs/in²
Thermal conductivity	DIN 52612 (Heat transfer coefficient)	.35K/cal/h/ °C (172.5Kcal/m² °C)
Dimensional Stability	DIN 51962 directional and cross directional shrinkage	<.1%
Rolling castor chair test	DIN 54324	passes
Chemical Resistance	Very good to most diluted acids, alkalis and common detergents.Some solvents can swell or dissolve vinyl.(Request detailed information from manufacturer).
Not resistant to rubber (yellowing from certain antioxidants, oil based grease, tar based asphalt, lipstick cause permanent staining or discoloration.
Safefloor Guard meets or exceeds requirements of Federal Specification LF-475A and SST 312b for dimensional stability, flexibility, resistance to reagents and residual indentation.