Specifications - Vinyl Resilient Flooring - Euro-Flex™ FSD NFSI High Traction

Physical Properties		Print Version



Flooring Radiant Panel	ASTM E648; NBSIR 75-950; NFPA 253, Critical Radiant Flux	0.73 W/cm², Class I
Resistance to Light Fading	ISO	6 8 good (indoor use)
Residual Indentation	LF-475A	.002" average
Residual Indentation	EN 433	.04mm
Abrasive Wear, Taber 1000 gm weight	H-18 wheels, 5000 cycles	1.1% loss of weight
Abrasive Wear, Taber 1000 gm weight	H-18 wheels, to wear layer penetration	>25,700 cycles, (2.1% loss of weight)
Static Coefficient of Friction	ASTM D-2047-03 James Test	.5 approx
National Floor Safety Institute Test	www.nfsi.org	High Traction >0.60 Certified
Static Coefficient of Friction	ASTM C-1028-89 dynamometer pull method	dry surface 0.6612 wet surface 0.5302
Shore Hardness	91
Static Load Limit	DIN 16961.2	>350 p.s.i.
Volume Resisitivity	NFPA 99	<2x10¹¹ ohms (not waxed)
Electrostatic Propensity	AATCC 134	Neolite step +5.3KV; Neolite scuff +6.0 kV; SD polyurethane step 0.2KV; SD polyurethane scuff 0.7KV
Chemical Resistance	Very good to most diluted acids, alkalis and common detergents. Some solvents can swell or dissolve vinyl. (Request detailed information from manufacturer).
Staining or permanent discoloration	Not resistant to rubber (yellowing from certain antioxidants, oil based grease, tar based asphalt, lipstick
Euro-flex^™ FSD HT tile meets or exceeds requirements of Federal Specification LF-475A and SST 312b for dimensional stability, flexibility, resistance to reagents and residual indentation.