< back
| Product Information | |
 |
Description Soft Color Type 350 features an opaque light absorbing, non-reflective solid color surface of cushioned sheet vinyl flooring. Soft Color is designed for medium traffic applications. Soft Color vinyl should only be used in facilities where the type of foot wear and casters can be specified by the property owner. Manufacturing Technology Soft Color Type 350 is manufactured by co-extruding a homogeneous vinyl solid color non-reflective wear layer over a cushioned vinyl backing. Recommended Application Soft Color 350 was designed for use on floors or walls in Photo, Cinema and TV Studios. It also finds use as a Theater Stage or Dance Floor. NOTE Any solid color vinyl flooring is more prone to show soil and scuff marks than marbleized vinyl. Do not use vinyl flooring under rubber tires. Avoid black rubber chair or equipment casters as this can cause permanent discoloration due to anti-oxidants in black rubber. Specify antistatic (gray) casters and non-smearing footwear for stage applications. Short Form Specification: Soft Color cushioned sheet vinyl flooring shall be a opaque non-reflective surface of homogeneous co-extruded solid colored surface over cushioned backing in rolls 1.5m x 20m (5' x 66'), as manufactured in the EEC for Tek Stil Concepts, Inc., P.O. Box 67, Haddonfield NJ 08033. The material shall be manufactured as a 2mm (.080" gauge) cushioned vinyl. Availability Rolls: 5' x 66' (1.5m x 20m) 330 sft/roll (30m2) Weight Rolls: (.65 lb/sft) (2000 gm/m2) 132 lb/roll 60 Kg/roll Colors 16 solid opaque non-reflective colors, as specified by the architect, designer or facility owner.  Color Match and marbleization are subject to commercial tolerances. No claims for visible defects or shade matching are accepted after installation. |
| Physical Properties | ||
 |
||
| Flooring Radiant Panel | ASTM E648; NBSIR 75-950; NFPA 253, Critical Radiant Flux | 0.73 W/cm², Class I |
| Smoke Density | ASTM E-662, NFPA 258 | <450 Average density in burning / smoldering mode |
| Resistance to Light Fading | ISO | 6-78 good (indoor use) |
| Shore Hardness A | 75 | |
| Chemical Resistance | Very good to most diluted acids, alkalis and common detergents.Some solvents can swell or dissolve vinyl.(Request detailed information from manufacturer). | |
| Not resistant to rubber (yellowing from certain antioxidants, oil based grease, tar based asphalt, lipstick cause permanent staining or discoloration. | ||
| Soft Color 350 meets or exceeds requirements of Federal Specification LF-475A and SST 312b for dimensional stability, flexibility, resistance to reagents and residual indentation. | ||
| Installation & Maintenance | |
|
|
|
|
| Recommended Maintenance Coarse dirt should be removed by vacuum cleaning or wiping with a soft brush. An initial treatment of 1-2 coats of Taski Under-Cover Sealer, followed by 4 coats of Taski Ombra for low gloss. Localized marks can be treated with a machine or with a wet scouring pad and cleaning spray. Wet clean with Taski R-50; Taski Combi-Gloss, spray buff with Taski Ultra Spray solutions; manual or machine scrubbing may be employed. Mop and Wipe clean methods are suitable. Dirty water can be mopped up and flooring can be left to dry. Mop and Wipe clean methods are suitable. Do not dry buff. NOTE Do not use vinyl tiles under black rubber wheels, such as in automotive showrooms, as there can be permanent discoloration (browning) due to the antioxidants used in rubber. Limited Warranty Products are warranted for ONE YEAR if installed in strict adherence to all factory specifications on approved sub-floors and by trained personnel. No warranty is extended for installation on sub-floors having >2.2% moisture by the carbide method or >3.0 lbs./1000 sft. moisture by the calcium chloride test method or on on-grade or below grade sub-floors where a film moisture barrier is not provided. Products are warranted for FIVE YEARS against non-conformance to technical specifications and deterioration of properties under normal conditions of use. Warranties are limited to repairing, or at seller's option replacing products if notice of defect is given in writing and if TSC's examination shows that the products have failed under the terms and limitations of this warranty. No responsibility for the cost of removal, re-installation, or freight can be assumed under this warranty. It is the responsibility of the purchaser to determine the suitability of the materials and of the sub-floor conditions for the intended use. Color match and marble-ization are subject to commercial tolerances. Claims for color match or any other visible material defects or damages cannot be accepted after installation. |
|
|||||||
 |
| home | contact site designed and maintained by manonfire |