< back

ESD Conductive Euro-Flex™

Product Information Print


Description
ESD euro-flex™ is a semi-glossy permanently ESD conductive vinyl industrial flooring product.



Manufacturing Technology
Co-extrusion process with full surface conductive backings

Recommended Application
Microchip and Electronics Manufacturing; Explosives and Munitions manufacturing; Military applications; Airport control towers Computer data centers, ESD sensitive areas in medical facilities

Availability
Rolls: 4'6" x 66' x .080" gauge
(1.4m x 20m x 2.0mm gauge)

Tiles: 24" x 24" x .080" gauge
(608 x 608mm x 2.0 mm gauge)

Weight
Rolls: 297 sft./roll 185 lbs./roll
Tiles: 15 tiles/box = 60 sft. Weight/box 38 lbs.

Colors

Color Match and marbleization are subject to commercial tolerances. No claims for visible defects or shade matching are accepted after installation.


Physical Properties
Surface Resistivity P.T.P. ASTM D257 <5.5 x 107 ohms
Resistance to Ground EOS-ESD 7.01 <1.0 x 106 ohms
Charge Decay Time FTMS 4046-101c <<<.17 seconds
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Residual Indentation LF-475A .002" average
Abrasive Wear, Taber 1000 gm weight H-18 wheels, 5000 cycles 1.1% loss of weight
Abrasive Wear, Taber 1000 gm weight H-18 wheels, to wear layer penetration >20,000 cycles
Static Coefficient of Friction ASTM D-2047-03 James Test .5 approx
Static Load Limit DIN 16961.2 >700 p.s.i.
Meets or exceeds minimum requirements of Federal Specifications for flexibility, dimensional stability, resistance to reagents and residual indentation LF-475a
SST-312b


Installation & Maintenance
Installation
  1. Follow detailed installation instructions.
    1. Installation Manual
      PDF format  Get Acrobat Reader
      2,720KB
  2. Install only on approved sub-surfaces.
  3. Install only on floors shich have a permanent moisture barrier and which measure <3 lb/1000 sft. vapor transmission



  • Tiles: Install with full surface Sigaway® dry adhesive
  • Install with ESD-106 water based conductive adhesive
Heat welding
  • Permanently glued rolls must be heat welded
  • Heat-welding is optional for tiles
Maintenance Follow detailed maintenance instructions.
  1. Maintenance Instuctions
    1. Instructions
      PDF format  Get Acrobat Reader
      133KB





Tek Stil Concepts, Inc.
 Contact
High Technology Specialty Flooring
P.O. Box 67, Haddonfield NJ 08033 USA.    Tel: 856/428-4464     Fax: 856/429-6532
www.tekstilconcepts.com




Platinum Associate Member of FCICA Proud Sponsor Install


home  |  contact  
site designed and maintained by manonfire