< back

ESD Dotfloor N-VHP Antistatic Rubber

Product Information Print


Description
ESD Dotfloor N-VHP is an industrial rubber flooring with a slightly textured surface with fine multicolor speckles for medium to high traffic. It is used where protection of electrostatic sensitive instrumentation is required. Uses are in Medical applications, laboratories, warehousing of electrostatic sensitive merchandise, and in electronics manufacturing areas. ESD rubber has the added benefit of resisting burns or chars due to hot solder.



Manufacturing Technology
Blends of natural and synthetic rubber mixed by banbury technology and molded

Recommended Application
Uses are in Medical applications, laboratories, warehousing of electrostatic sensitive merchandise, and in electronics manufacturing areas.

Availability
Rolls: 6'3" x 33' x .080" gauge
(1.9m x 10m x 2mm gauge)
206 sft./roll

Tiles: 24" x 24" x .080" gauge
(610 x 610 mm x 2 mm gauge)
20 tiles/box = (80 sft./box )

Weight
Rolls: /rolls 135 lb. (61 Kg)  /sft. .654 lb. (3.2 Kg/m2)
Tiles: /box of tile 52.5 lb. (24 Kg)

Colors

Color Match and marbleization are subject to commercial tolerances. No claims for visible defects or shade matching are accepted after installation.


Physical Properties
Surface Resistivity P.T.P. ASTM D257 <1 x 109 ohms
Resistance to Ground EOS-ESD 7.01 <1.0 x 108 ohms
Charge Decay Time FTMS 4046-101c <.2 seconds
Electrostatic Charge shuffle test AATCC 134 <2
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Damage to burning cigarettes DIN 51961 No Damage
Dimensional Stability DIN 51962 6 hours 80°C No appreciable change
Residual Indentation DIN 51955 <.2 mm
Static Coefficient of Friction DIN 51130 R9
Hardness ASTM D2240 85± 5 Shore
Static Load Limit DIN 16961.2 >700 p.s.i.


Installation & Maintenance
Installation
  1. Follow detailed installation instructions.
  2. Install only on approved sub-surfaces.
  3. Install only on floors shich have a permanent moisture barrier and which measure <3 lb/1000 sft. vapor transmission


  • Rolls: Install with conductive urethane or epoxy adhesive and copper grounding tape.

  • Tiles: Install with conductive urethane or epoxy adhesive and copper grounding tape.
Heat welding
  • Heat welding is optional for rolls
  • Heat-welding is optional for tiles
Maintenance Follow detailed maintenance instructions.





Tek Stil Concepts, Inc.
 Contact
High Technology Specialty Flooring
P.O. Box 67, Haddonfield NJ 08033 USA.    Tel: 856/428-4464     Fax: 856/429-6532
www.tekstilconcepts.com




Platinum Associate Member of FCICA Proud Sponsor Install


home  |  contact  
site designed and maintained by manonfire