< back

AZO ESD Conductive Berber

Product Information

Print

Description ESD conductive Berber is an industrial carpet designed for extra heavy commercial traffic. It is used in ESD static control areas such as electronics manufacturing, military, telecommunications, or sensitive data processing centers. Manufacturing Technology Non woven double needling technology from branded staple extrusion dyed olefin fibers graphite conductive fibers. 50 ozs/sy. 1700 gm/m2 face fiber weight; 8.0 ozs. Acrylic dispersion primary with fully conductive rubber backing. Recommended Application Quality Control Areas; Electronics Manufacturing; Office Areas near static control manufacturing; Warehouse spaces for ESD sensitive materials; Medical Testing facilities with ESD sensitive equipment. Access Floors; Airport Control Towers. Availability Rolls 6'6" x 50' x .3/8" gauge (2.0m x 15 m x 10 mm gauge) Tiles 20" x 20" x .3/8" gauge (500 x 500 mm x 10 mm gauge) Weight Rolls: 325 sft (30m2) 200 lb/roll (91 Kg/roll) Tiles: 12 tiles/box (32.5 sft./box ) 20 lbs/box (8 Kg/box) Colors Color Match and marbleization are subject to commercial tolerances. No claims for visible defects or shade matching are accepted after installation.

Physical Properties
Surface Resistivity P.T.P.	ASTM D257	<7.5 x 106 ohms
Resistance to Ground	EOS-ESD 7.01	<1.0 x 106 ohms
Charge Decay Time	FTMS 4046-101c	<<<.17 seconds
Flammability	Methenamine Pill Test DOC FF1-70	passes
Noise Reduction Coefficient	ASTM 423-90	NRC .25 approx.

Installation & Maintenance
Installation Follow detailed installation instructions. Installation Manual PDF format  Get Acrobat Reader 151KB Install only on approved sub-surfaces. Install only on floors shich have a permanent moisture barrier and which measure <3 lb/1000 sft. vapor transmission	Rolls: loose lay as mats Install with Sigaway® Electronic full surface conductive dry adhesive or with Sigaway® Original regular dry adhesive with Siga Circuit seam bridging tape. Install with full surface Sigaway® dry adhesive Install with ESD-106 water based conductive adhesive Tiles: Install with full surface Sigaway® dry adhesive Install with ESD-106 water based conductive adhesive
Seaming Adhesive	No special seaming adhesive needed
Maintenance	Follow detailed maintenance instructions. Maintenance Instuctions Instructions PDF format  Get Acrobat Reader 118KB

Tek Stil Concepts, Inc. Contact High Technology Specialty Flooring P.O. Box 67, Haddonfield NJ 08033 USA.    Tel: 856/428-4464     Fax: 856/429-6532 www.tekstilconcepts.com

home  |  contact   site designed and maintained by manonfire