< back
| Product Information | |
 Additional Information  Group IV Specifications (132KB) Physical Properties (132KB) Installation (155KB) AZO Maintenance Limited Warranty (82KB)Printing/downloading instructions  |
Description Azo Lugano Nops 1100 Carpet is an indoor-outdoor flat felt pattern industrial flooring product designed for pool areas and locker rooms. Lugano Nops 1100 resists UV, pool chemicals, salt water. The product has a breathable water permeable backing. Special Order Colors  Manufacturing Technology AZO Lugano Nops 1100 is manufactured as a proprietary Fiver V-loop double needled 1/4" gauge flat felt latex backed construction from blended 100% heavy denier (18-240 d.p.f.) solution colored branded ASOTA olefin fibers, in a UV light fade- and chemical and mildew resistant product. The materials have a primary latex backing that extends to the middle of the carpet, but shall not extend to the pile fiber. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber so as to mask minimum presence of heavy denier fibers an lack of needling density. The secondary backing comprises small pedestals ¼" high made of vinyl or rubber. Pedestals are applied to provide an approx. 40% open area for water drainage. Recommended Application Azo Lugano Nops 1100 rolls are a double needled flat felt ¼" product backed with ¼"drainage pedestals that will be glued into liquid adhesive. The product is designed to allow water to penetrate from the surface, and to run off between the carpet and the glued pedestals provided there is positive drainage in the concrete. It is suitable for use outdoors, in locker rooms, around wave pools. Lugano Nops is not suitable for heavy traffic, for entrances, spike traffic, or rolling loads. The product must be 100% glued because of it's marginal dimensional stability. Short Form Specification: (See Group IV Specifications) Carpet shall be Azo Lugano Nops 1100 (32 ozs/sy) 1/4" gauge double needled indoor outdoor carpet with a ¼" drainage pedestal backing for a total ½" gauge, as manufactured by ISO 9001 Certified Manufacturer AZO GMBH, Germany and as distributed by Tek Stil Concepts, Inc., P.O. Box 67, Haddonfield NJ 08033. Carpet shall be in rolls 6'6" x 70' (2m x 21m), in colors as selected by the Architect or Building Owner. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber so as to mask minimum presence of heavy denier fibers and lack of needling density. Installation Please consult detailed installation instructions. The carpet must be glued with approved TSC-300 adhesive TSC-300 adhesive Maintenance: Use commercial high power dual motor beater bar type vacuum cleaners frequently. For periodic wet cleaning, use a hose. Limitations of Warranty Please consult details of limited warranty for UV resistance (outdoor applications); Product purchase, purchase of adhesive TSC-300, and installation details must be registered at the time of installation. In the event of a warranty claim established to the manufacturer's satisfaction, AZO GMBH agrees at its option, to repair or to replace the product out of current lines at the time of replacement. The labor costs of removing and/or reinstalling replacement materials and associated freight costs are to be borne by the purchaser. No liability will be assumed for any consequential damage, loss or expense. No liability will be assumed for commercial shade variations or for materials with visible defects after such materials have been installed. |
|
|||||||
 |
| home | contact site designed and maintained by manonfire |
| close |
| The links to the Additional Information documents are in Adobe PDF format and require Adobe Acrobat Reader for viewing. You can get Acrobat reader at Adobe's website. You can simply click the links to view the documents or right click and select "Save As" to save the documents to your hard disk. Once you have the documents open, you can oprint tham as you would any other document. |